Sirvi Autor "Kukli, Kaupo" järgi

Nüüd näidatakse 1 - 19 19

3D incoherent imaging using an ensemble of sparse self-rotating beams
(Optics Express, 2023) Bleahu, Andrei-ioan; Gopinath, Shivasubramanian; Kahro, Tauno; Angamuthu, Praveen Periyasamy; Rajeswary, Aravind Simon John Francis; Prabhakar, Shashi; Kumar, Ravi; Salla, Gangi Reddy; Singh, Ravindra P.; Kukli, Kaupo; Tamm, Aile; Rosen, Joseph; Anand, Vijayakumar
Interferenceless coded aperture correlation holography (I-COACH) is one of the simplest incoherent holography techniques. In I-COACH, the light from an object is modulated by a coded mask, and the resulting intensity distribution is recorded. The 3D image of the object is reconstructed by processing the object intensity distribution with the pre-recorded 3D point spread intensity distributions. The first version of I-COACH was implemented using a scattering phase mask, which makes its implementation challenging in light-sensitive experiments. The I-COACH technique gradually evolved with the advancement in the engineering of coded phase masks that retain randomness but improve the concentration of light in smaller areas in the image sensor. In this direction, I-COACH was demonstrated using weakly scattered intensity patterns, dot patterns and recently using accelerating Airy patterns, and the case with accelerating Airy patterns exhibited the highest SNR. In this study, we propose and demonstrate I-COACH with an ensemble of self-rotating beams. Unlike accelerating Airy beams, self-rotating beams exhibit a better energy concentration. In the case of self-rotating beams, the uniqueness of the intensity distributions with depth is attributed to the rotation of the intensity pattern as opposed to the shifts of the Airy patterns, making the intensity distribution stable along depths. A significant improvement in SNR was observed in optical experiments.
4D imaging using accelerating airy beams and nonlinear reconstruction
(2023) Bleahu, Andrei; Gopinath, Shivasubramanian; Anand, Vijayakumar; Rosen, Joseph; Juodkazis, Saulius; Tamm, Aile; Kukli, Kaupo; Rajeswary, Aravind Simon John Francis; Katkus, Tomas; Pristy, Agnes; Ng, Soon Hock; Praveen, P. A.; Kahro, Tauno; Smith, Daniel; Arokiaraj, Francis Gracy; Kumar, Ravi
Atomic layer deposition of artificially structured dielectric materials
(Tartu : Tartu University Press, 1999) Kukli, Kaupo
Coded Aperture Imaging using Non-Linear Lucy-Richardson Algorithm
(2025) Xavier, Agnes Pristy Ignatius; Kahro, Tauno; Gopinath, Shivasubramanian; Tiwari, Vipin; Smith, Daniel; Kasikov, Aarne; Piirsoo, Helle-Mai; Ng, Soon Hock; Rajeswary, Aravind Simon John Francis; Vongsvivut, Jitraporn; Tamm, Aile; Kukli, Kaupo; Juodkazis, Saulius; Rosen, Joseph; Anand, Vijayakumar
Imaging involves the process of recording and reproducing images as close to reality as possible, encompassing both direct and indirect approaches. In direct imaging, the object is directly recorded. Coded aperture imaging (CAI) is an example of indirect imaging, that utilizes optical recording and computational reconstruction to obtain information about an object. Computational reconstruction can be achieved using different linear, non-linear, iterative, and deep learning algorithms. In this study, we proposed and demonstrated two computational reconstruction algorithms based on the non-linear Lucy-Richardson algorithm (NL-LRA), one for limited support images and another for full-view images based on entropy reduction. The efficacy of these algorithms has been validated through simulations and optical experiments carried out in visible and infrared (IR) light with different coded phase masks. The methods were also tested on a commercial IR microscope with internal Globar™ and synchrotron sources. The results obtained from the two algorithms were compared with those from their parent methods, and a notable improvement in both entropy and the convergence rate was observed. We believe the developed algorithms will drastically improve image reconstruction in incoherent imaging applications
Deep Deconvolution of Object Information Modulated by a Refractive Lens Using Lucy-Richardson-Rosen Algorithm
(2022) Praveen, P.A.; Arockiaraj, Francis Gracy; Gopinath, Shivasubramanian; Smith, Daniel; Kahro, Tauno; Valdma, Sandhra-Mirella; Bleahu, Andrei; Ng, Soon Hock; Reddy, Andra Naresh Kumar; Katkus, Tomas; Rajeswary, Aravind Simon John Francis; Ganeev, Rashid A.; Pikker, Siim; Kukli, Kaupo; Tamm, Aile; Juodkazis, Saulius; Anand, Vijayakumar
A refractive lens is one of the simplest, most cost-effective and easily available imaging elements. Given a spatially incoherent illumination, a refractive lens can faithfully map every object point to an image point in the sensor plane, when the object and image distances satisfy the imaging conditions. However, static imaging is limited to the depth of focus, beyond which the point-to-point mapping can only be obtained by changing either the location of the lens, object or the imaging sensor. In this study, the depth of focus of a refractive lens in static mode has been expanded using a recently developed computational reconstruction method, Lucy-Richardson-Rosen algorithm (LRRA). The imaging process consists of three steps. In the first step, point spread functions (PSFs) were recorded along different depths and stored in the computer as PSF library. In the next step, the object intensity distribution was recorded. The LRRA was then applied to deconvolve the object information from the recorded intensity distributions during the final step. The results of LRRA were compared with two well-known reconstruction methods, namely the Lucy-Richardson algorithm and non-linear reconstruction.
Enhanced design of multiplexed coded masks for Fresnel incoherent correlation holography
(Scientific Reports, 2023) Gopinath, Shivasubramanian; Bleahu, Andrei; Kahro, Tauno; Rajeswary, Aravind Simon John Francis; Kumar, Ravi; Kukli, Kaupo; Tamm, Aile; Rosen, Joseph; Anand, Vijayakumar
Fresnel incoherent correlation holography (FINCH) is a well-established incoherent digital holography technique. In FINCH, light from an object point splits into two, differently modulated using two diffractive lenses with different focal distances and interfered to form a self-interference hologram. The hologram numerically back propagates to reconstruct the image of the object at different depths. FINCH, in the inline configuration, requires at least three camera shots with different phase shifts between the two interfering beams followed by superposition to obtain a complex hologram that can be used to reconstruct an object’s image without the twin image and bias terms. In general, FINCH is implemented using an active device, such as a spatial light modulator, to display the diffractive lenses. The first version of FINCH used a phase mask generated by random multiplexing of two diffractive lenses, which resulted in high reconstruction noise. Therefore, a polarization multiplexing method was later developed to suppress the reconstruction noise at the expense of some power loss. In this study, a novel computational algorithm based on the Gerchberg-Saxton algorithm (GSA) called transport of amplitude into phase (TAP-GSA) was developed for FINCH to design multiplexed phase masks with high light throughput and low reconstruction noise. The simulation and optical experiments demonstrate a power efficiency improvement of ~ 150 and ~ 200% in the new method in comparison to random multiplexing and polarization multiplexing, respectively. The SNR of the proposed method is better than that of random multiplexing in all tested cases but lower than that of the polarization multiplexing method.
Enhanced design of pure phase greyscale diffractive optical elements by phase-retrieval-assisted multiplexing of complex functions
(2023) Gopinath, Shivasubramanian; Bleahu, Andrei; Kahro, Tauno; Rajeswary, Aravind Simon John Francis; Kumar, Ravi; Kukli, Kaupo; Tamm, Aile; Rosen, Joseph; Anand, Vijayakumar
Extending the Depth of Focus of Infrared Microscope Using a Binary Axicon Fabricated on Barium Fluoride
(2024) Han, Molong; Smith, Daniel; Kahro, Tauno; Stonytė, Dominyka; Kasikov, Aarne; Gailevičius, Darius; Tiwari, Vipin; Xavier, Agnes Pristy Ignatius; Gopinath, Shivasubramanian; Ng, Soon Hock; Rajeswary, Aravind Simon John Francis; Tamm, Aile; Kukli, Kaupo
Axial resolution is one of the most important characteristics of a microscope. In all microscopes, a high axial resolution is desired in order to discriminate information efficiently along the longitudinal direction. However, when studying thick samples that do not contain laterally overlapping information, a low axial resolution is desirable, as information from multiple planes can be recorded simultaneously from a single camera shot instead of plane-by-plane mechanical refocusing. In this study, we increased the focal depth of an infrared microscope non-invasively by introducing a binary axicon fabricated on a barium fluoride substrate close to the sample. Preliminary results of imaging the thick and sparse silk fibers showed an improved focal depth with a slight decrease in lateral resolution and an increase in background noise.
Holographic solution to a fundamental problem in diffractive optics: resolution beyond diffraction and lithography limits
(2023) Bleahu, Andrei; Gopinath, Shivasubramanian; Xavier, Agnes Pristy Ignatius; Kahro, Tauno; Reddy, Andra Naresh Kumar; Arockiaraj, Francis Gracy; Smith, Daniel; Ng, Soon Hock; Katkus, Tomas; Rajeswary, Aravind Simon John Francis; Angamuthu, Praveen Periyasami; Pikker, Siim; Kukli, Kaupo; Tamm, Aile; Juodkazis, Saulius; Rosen, Joseph; Anand, Vijayakumar
Implementation of a Large-Area Diffractive Lens Using Multiple Sub-Aperture Diffractive Lenses and Computational Reconstruction
(Licensee MDPI, 2022) Gopinath, Shivasubramanian; Praveen, Periyasamy Angamuthu; Kahro, Tauno; Bleahu, Andrei-Ioan; Arockiaraj, Francis Gracy; Smith, Daniel; Ng, Soon Hock; Juodkazis, Saulius; Kukli, Kaupo; Tamm, Aile; Anand, Vijayakumar
Direct imaging systems that create an image of an object directly on the sensor in a single step are prone to many constraints, as a perfect image is required to be recorded within this step. In designing high resolution direct imaging systems with a diffractive lens, the outermost zone width either reaches the lithography limit or the diffraction limit itself, imposing challenges in fabrication. However, if the imaging mode is switched to an indirect one consisting of multiple steps to complete imaging, then different possibilities open. One such method is the widely used indirect imaging method with Golay configuration telescopes. In this study, a Golay-like configuration has been adapted to realize a large-area diffractive lens with three sub-aperture diffractive lenses. The sub-aperture diffractive lenses are not required to collect light and focus them to a single point as in a direct imaging system, but to focus independently on different points within the sensor area. This approach of a Large-Area Diffractive lens with Integrated Sub-Apertures (LADISA) relaxes the fabrication constraints and allows the sub-aperture diffractive elements to have a larger outermost zone width and a smaller area. The diffractive sub-apertures were manufactured using photolithography. The fabricated diffractive element was implemented in indirect imaging mode using non-linear reconstruction and the Lucy–Richardson–Rosen algorithm with synthesized point spread functions. The computational optical experiments revealed improved optical and computational imaging resolutions compared to previous studies.
Implementation of a Large-Area Diffractive Lens Using Multiple Sub-Aperture Diffractive Lenses and Computational Reconstruction
(2023) Gopinath, Shivasubramanian; Angamuthu, Praveen Periysamy; Kahro, Tauno; Bleahu, Andrei; Arockiaraj, Francis Gracy; Smith, Daniel; Hock Ng, Soon; Juodkazis, Saulius; Kukli, Kaupo; Tamm, Aile; Anand, Vijayakumar
Direct imaging systems that create an image of an object directly on the sensor in a single step are prone to many constraints, as a perfect image is required to be recorded within this step. In designing high resolution direct imaging systems with a diffractive lens, the outermost zone width either reaches the lithography limit or the diffraction limit itself, imposing challenges in fabrication. However, if the imaging mode is switched to an indirect one consisting of multiple steps to complete imaging, then different possibilities open. One such method is the widely used indirect imaging method with Golay configuration telescopes. In this study, a Golay-like configuration has been adapted to realize a large-area diffractive lens with three sub-aperture diffractive lenses. The sub-aperture diffractive lenses are not required to collect light and focus them to a single point as in a direct imaging system, but to focus independently on different points within the sensor area. This approach of a Large-Area Diffractive lens with Integrated Sub-Apertures (LADISA) relaxes the fabrication constraints and allows the sub-aperture diffractive elements to have a larger outermost zone width and a smaller area. The diffractive sub-apertures were manufactured using photolithography. The fabricated diffractive element was implemented in indirect imaging mode using non-linear reconstruction and the Lucy–Richardson–Rosen algorithm with synthesized point spread functions. The computational optical experiments revealed improved optical and computational imaging resolutions compared to previous studies.
Interferenceless coded aperture correlation holography for five-dimensional imaging of 3D space, spectrum and polarization
(2025) Joshi, Narmada; Tiwari, Vipin; Kahro, Tauno; Xavier, Agnes Pristy Ignatius; Tahara, Tatsuki; Kasikov, Aarne; Kukli, Kaupo; Juodkazis, Saulius; Tamm, Aile; Rosen, Joseph; Anand, Vijayakumar
Interferenceless coded aperture correlation holography (I-COACH) is a robust imaging technique for recovering three-dimensional object information using incoherent holography without two-beam interference. In this study, five-dimensional (5D) imaging along 3D space, spectrum and polarization in I-COACH is proposed and experimentally demonstrated for the first time. The proposed technique exploits the polarization-dependent light modulation characteristics of spatial light modulators to record polarization-dependent intensity distributions, which are distinguished by significant blurring between orthogonal polarization states. 5D I-COACH is implemented by inter-connecting all five dimensions in a single frame, and image recovery is attempted from different configurations of recorded point spread intensity distributions and response-to-object intensity distributions along 5D using recently developed deconvolution techniques. The simulation and experimental results confirm the 5D imaging capabilities of I-COACH. The proposed technique can be a useful tool for birefringence microscopy, and functional and structural imaging applications.
Preface: International Conference on Holography Meets Advanced Manufacturing (HMAM2)
(2023) Anand, Vijayakumar; Jayavel, Amudhavel; Palm, Viktor; Gopinath, Shivasubramanian; Bleahu, Andrei; Rajeswary, Aravind Simon John Francis; Kukli, Kaupo; Balasubramani, Vinoth; Smith, Daniel; Ng, Soon Hock; Juodkazis, Saulius
The CIPHR group, Institute of Physics, University of Tartu, Estonia, and Optical Sciences Center, Swinburne University of Technology, Australia, jointly organized the interdisciplinary online conference “Holography Meets Advanced Manufacturing” during 20–22 February 2023.
Realizing large-area diffractive lens using multiple subaperture diffractive lenses and computational reconstruction
(2023) Gopinath, Shivasubramanian; Xavier, Agnes Pristy Ignatius; Angamuthu, Praveen Periyasamy; Kahro, Tauno; Tamm, Oskar; Bleahu, Andrei; Arockiaraj, Francis Gracy; Smith, Daniel; Ng, Soon Hock; Juodkazis, Saulius; Kukli, Kaupo; Tamm, Aile; Anand, Vijayakumar
Recent Advances in Spatially Incoherent Coded Aperture Imaging Technologies
(2025) Tiwari, Vipin; Gopinath, Shivasubramanian; Kahro, Tauno; Arockiaraj, Francis Gracy; Xavier, Agnes Pristy Ignatius; Joshi, Narmada; Kukli, Kaupo; Tamm, Aile; Juodkazis, Saulius; Rosen, Joseph; Anand, Vijayakumar
Coded aperture imaging (CAI) is a powerful imaging technology that has rapidly developed during the past decade. CAI technology and its integration with incoherent holography have led to the development of several cutting-edge imaging tools, devices, and techniques with widespread interdisciplinary applications, such as in astronomy, biomedical sciences, and computational imaging. In this review, we provide a comprehensive overview of the recently developed CAI techniques in the framework of incoherent digital holography. The review starts with an overview of the milestones in modern CAI technology, such as interferenceless coded aperture correlation holography, followed by a detailed survey of recently developed CAI techniques and system designs in subsequent sections. Each section provides a general description, principles, potential applications, and associated challenges. We believe that this review will act as a reference point for further advancements in CAI technologies.
Self-wavefront interference using transverse splitting holography
(2023) Bleahu, Andrei-ioan; Gopinath, Shivasubramanian; Kahro, Tauno; Hock Ng, Soon; Kukli, Kaupo; Tamm, Aile; Juodkazis, Saulius; Rosen, Joseph; Anand, Vijayakumar
Manufacturing diffractive lenses with a high Numerical Aperture (NA) is a challenging task due to limitations in lithography methods and the inverse relation between the width and the radius of the zones. With low-resolution lithography techniques such as photolithography, the zone width reaches the lithography limit within a short radius, resulting in low-NA diffractive lenses. With high-resolution electron beam lithography, it is possible to manufacture high-NA diffractive lenses by prolonged writing. However, in this case, the width of the outermost zones becomes subwavelength, inducing undesirable polarization effects. In this proof-of-concept study, a holography solution has been demonstrated to enhance the imaging resolution of low-NA diffractive lenses. The light from an object is partly modulated by the low-NA diffractive lens and interfered with the remaining unmodulated light outside the area of the diffractive lens. This self-interference hologram of the object is processed in the computer with the point spread hologram to reconstruct the object with a resolution corresponding to the NA of the image sensor. This new imaging technique is called Self-Wavefront Interference using Transverse Splitting Holography (SWITSH). A resolution enhancement of ∼10 times has been demonstrated using a low-NA diffractive lens and SWITSH compared to direct imaging with the same low-NA diffractive lens.
Spatio spectral correlations in interferenceless coded aperture correlation holography with vortex speckles
(2025) Vilardell, Eulàlia Puig; Gopinath, Shivasubramanian; Tiwari, Vipin; Kahro, Tauno; Kasikov, Aarne; Kõiv, Markus; Reddy, Andra Naresh Kumar; Rosen, Joseph; Kukli, Kaupo; Gailevičius, Darius; Juodkazis, Saulius; Anand, Vijayakumar
Interferenceless coded aperture correlation holography (I-COACH) is a computational imaging method that enables three-dimensional information of an object to be obtained without the need for two-beam interference. For the first time, in this study, we propose and demonstrate I-COACH with vortex speckles (I-COACH-VS). The vortex speckle distribution is generated by designing a unique coded mask by combining several spiral phases with different topological charges and linear phases using the transport of the amplitude into the phase based on the Gerchberg-Saxton algorithm (TAP-GSA). The spiral phase generates multiple beams carrying different orbital angular momentum, and the linear phase is used to map the beams at different locations within the image sensor to achieve a random vortex speckle distribution. The recently developed Lucy-Richardson-Rosen algorithm (LRRA) is used for image reconstruction. The theory, simulation studies, design of a coded mask by TAP-GSA, fabrication of coded masks by photolithography, and experimental demonstration of I-COACH-VS are presented. We believe that the developed method will be impactful in fields such as incoherent digital holography and computational imaging.
Spectroskopic ellipsometry as a versatile tool to study thin films grown by atomic layer deposition
(Tartu Ülikool, 2014) Hoxha, Roland; Kukli, Kaupo; Tamm, Aile
Statement of Peer Review
(2023) Anand, Vijayakumar; Jayavel, Amudhavel; Palm, Viktor; Gopinath, Shivasubramanian; Bleahu, Andrei; Rajeswary, Aravind Simon John Francis; Kukli, Kaupo; Balasubramani, Vinoth; Kumar, Ravi; Smith, Daniel; Ng, Soon Hock; Juodkazis, Saulius